西安博尔新材料有限责任公司
贵州恒通世纪电力工程有限公司
Check category

Scarce cubic silicon carbide materials from around the world attract customers from the United States and South Korea
Top

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2020-01-07 15:56
  • Views:

(Summary description)Silicon carbide (SiC) and gallium nitride (GaN) have also become widely known as key materials, but what most people don't know is that the most common and widely used in refractory, superhard abrasives, advanced ceramics and other industries is actually the alpha phase. Silicon carbide, which is a far cry from the low temperature stable β-phase silicon carbide that is really used in semiconductors. Β-SiC belongs to the cubic system (diamond crystal), which is cubic silicon carbide. In addition to its use in the third-generation semiconductor industry to prepare silicon carbide wafers, it has high chemical stability, high hardness, high thermal conductivity, low thermal expansion coefficient, wide energy band gap, high electron drift speed, and high electron migration. Rate, special resistance temperature characteristics, etc., are also widely used in precision machining technology, military industry, aerospace, advanced refractory materials, special ceramic materials, advanced grinding materials and and reinforcement materials, so it is also compared with α-SiC. The application scope and application capacity are much larger. For example, in the application of polishing and grinding, the sharp edges of β-SiC can improve the polishing efficiency; in the field of high-end special ceramics, adding β-SiC can improve the sintering activity of ceramics. Left: American customers, Right: South Korean customer cubic silicon carbide new materials, Xi'an Bor New Materials Co., Ltd. (hereinafter referred to as Bor New Materials), Xi'an University of Science and Technology, Shaanxi Provincial Silicon Magnesium Carbon Micro and Nano Materials Engineering Technology Research Center, experienced 26 years, successfully developed and produced. At present, the domestic market share is more than 95%, and the international market share is more than 50%. Only 4 companies in Japan, Germany, and the United States can produce in small batches. Due to the scarcity of products, high-tech barriers, and confidentiality, the market investment is very high. Small, which has attracted customers from the United States and South Korea. More than 10 companies from Japan, Germany, Switzerland, and Taiwan have recently sent letters to purchase these products. As of now, the company has built an industrialized demonstration production line with an annual output of 500T in Xi'an National Aviation High-tech Industrial Base. The production technology is the first in China, the world's leading, mature and reliable. For more than three years, the company has provided about 200 varieties of eight categories of market segment products to advanced manufacturing fields at home and abroad. Especially, the huge application potential of semiconductor chip substrates and ultra-fine abrasive materials has had a great impact on domestic and international markets. .

Scarce cubic silicon carbide materials from around the world attract customers from the United States and South Korea
Top

(Summary description)Silicon carbide (SiC) and gallium nitride (GaN) have also become widely known as key materials, but what most people don't know is that the most common and widely used in refractory, superhard abrasives, advanced ceramics and other industries is actually the alpha phase. Silicon carbide, which is a far cry from the low temperature stable β-phase silicon carbide that is really used in semiconductors. Β-SiC belongs to the cubic system (diamond crystal), which is cubic silicon carbide. In addition to its use in the third-generation semiconductor industry to prepare silicon carbide wafers, it has high chemical stability, high hardness, high thermal conductivity, low thermal expansion coefficient, wide energy band gap, high electron drift speed, and high electron migration. Rate, special resistance temperature characteristics, etc., are also widely used in precision machining technology, military industry, aerospace, advanced refractory materials, special ceramic materials, advanced grinding materials and and reinforcement materials, so it is also compared with α-SiC. The application scope and application capacity are much larger. For example, in the application of polishing and grinding, the sharp edges of β-SiC can improve the polishing efficiency; in the field of high-end special ceramics, adding β-SiC can improve the sintering activity of ceramics. Left: American customers, Right: South Korean customer cubic silicon carbide new materials, Xi'an Bor New Materials Co., Ltd. (hereinafter referred to as Bor New Materials), Xi'an University of Science and Technology, Shaanxi Provincial Silicon Magnesium Carbon Micro and Nano Materials Engineering Technology Research Center, experienced 26 years, successfully developed and produced. At present, the domestic market share is more than 95%, and the international market share is more than 50%. Only 4 companies in Japan, Germany, and the United States can produce in small batches. Due to the scarcity of products, high-tech barriers, and confidentiality, the market investment is very high. Small, which has attracted customers from the United States and South Korea. More than 10 companies from Japan, Germany, Switzerland, and Taiwan have recently sent letters to purchase these products. As of now, the company has built an industrialized demonstration production line with an annual output of 500T in Xi'an National Aviation High-tech Industrial Base. The production technology is the first in China, the world's leading, mature and reliable. For more than three years, the company has provided about 200 varieties of eight categories of market segment products to advanced manufacturing fields at home and abroad. Especially, the huge application potential of semiconductor chip substrates and ultra-fine abrasive materials has had a great impact on domestic and international markets. .

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2020-01-07 15:56
  • Views:
Information

Silicon carbide (SiC) and gallium nitride (GaN) have also become widely known as key materials, but what most people don't know is that the most common and widely used in refractory, superhard abrasives, advanced ceramics and other industries is actually the alpha phase. Silicon carbide, which is a far cry from the low temperature stable β-phase silicon carbide that is really used in semiconductors.

β-SiC belongs to the cubic system (diamond crystal), which is cubic silicon carbide. In addition to its use in the third-generation semiconductor industry to prepare silicon carbide wafers, it has high chemical stability, high hardness, high thermal conductivity, low thermal expansion coefficient, wide energy band gap, high electron drift speed, and high electron migration. Rate, special resistance temperature characteristics, etc., are also widely used in precision machining technology, military industry, aerospace, advanced refractory materials, special ceramic materials, advanced grinding materials and and reinforcement materials, so it is also compared with α-SiC. The application scope and application capacity are much larger. For example, in the application of polishing and grinding, the sharp edges of β-SiC can improve the polishing efficiency; in the field of high-end special ceramics, adding β-SiC can improve the sintering activity of ceramics.

Left: American customers, Right: Korean customers
 
Cubic Silicon Carbide New Materials was successfully developed and produced by Xi'an Bor New Material Co., Ltd. (hereinafter referred to as Bor New Materials) in conjunction with Xi'an University of Science and Technology, and the Research Center of Silicon Magnesium Carbon Micro-nano Materials Engineering Technology in Shaanxi Province. At present, the domestic market share is more than 95%, and the international market share is more than 50%. Only 4 companies in Japan, Germany, and the United States can produce in small batches. Due to the scarcity of products, high-tech barriers, and confidentiality, the market investment is very high. Small, which has attracted customers from the United States and South Korea. More than 10 companies from Japan, Germany, Switzerland, and Taiwan have recently sent letters to purchase these products.
 
As of now, the company has built an industrialized demonstration production line with an annual output of 500T in Xi'an National Aviation High-tech Industrial Base. The production technology is the first in China, the world's leading, mature and reliable. For more than three years, the company has provided about 200 varieties of eight categories of market segment products to advanced manufacturing fields at home and abroad. Especially, the huge application potential of semiconductor chip substrates and ultra-fine abrasive materials has had a great impact on domestic and international markets. .

Scan the QR code to read on your phone

底部导航

Time of issue:2019-04-29 00:00:00
西安博尔新材料有限责任公司

Copyright © 2019 Xi'an boer New Material Co., Ltd. All Rights Reserved  陕ICP备19025199号-1   Powered by www.300.cn